Clarke CPP2B Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Pressurised Paint Container.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

IMPORTANT

Please read all of the safety and operating instructions carefully before using 
this product. Please pay particular attention to all sections of these instructions 
that display warning symbols and notices.    

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

WARNING: THIS SYMBOL IS USED THROUGHOUT THE USER GUIDE 
WHENEVER THERE IS A RISK OF PERSONAL INJURY. ENSURE THAT 
THESE WARNINGS ARE READ AND UNDERSTOOD AT ALL TIMES.

Содержание CPP2B













Отзывы: