10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SELECTING THE OPERATING MODE
HAMMER ACTION SELECTOR
1. With the drill not operating, set the
hammer action selector to the
required setting.
• Left - Hammer Assisted Drilling
• Right - Drill Only
IMPORTANT: When using the
“hammer action” you only need to
apply light pressure. Too much pressure will place unnecessary load on the
motor. Check the drill bits regularly, re-sharpen or replace if required.
ROTATION ON/OFF SELECTOR
Some jobs require the chuck to
remain stationary yet still have the
hammer effect, such as chiselling
concrete, plaster etc.
• Set the rotation selector to the
right for “no rotation”.
• Set the rotation selector to the
left for “normal rotation”.
CAUTION: THESE OPERATIONS SHOULD ONLY BE PERFORMED WHEN THE
DRILL IS AT A COMPLETE STOP.
Mode
Hammer Action selector
Rotation selector
Drill Only
Drill Only
ON
Hammer Drill
Hammer Assisted Drilling
ON
Hammer only (no rotation)
Hammer Assisted Chiselling OFF
