11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SWITCHING ON & OFF
1. Insert the mains plug into a mains
power socket.
• The green LED on the handle of
the drill will come on to indicate
that power is present.
• If the red LED comes on, it is to
indicate that the carbon
brushes in the drill motor are
worn and should be replaced
by your dealer.
2. Squeeze the trigger to start the drill.
USING THE DUST SHIELD
1. When chiselling masonry, always
use the shield to reduce the
amount of particles likely to strike
the operator. Slide it over the
chisel before fitting the chisel into
the chuck.
