18
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
45 DEGREE STOP ADJUSTMENT
1. Loosen the bevel clamp handle
and set the saw head as far to the
left as possible (this should be the
45° angle)
2. Place a 45° set square on the
table and up against the blade.
NOTE:
Do not touch the tips of the
blade teeth with the square.
3. Loosen the locking nut and turn
the 45° stop screw in or out until
the blade is at 45° to the table.
4. Re-tighten the locking nut.
5. If the bevel pointer does not
indicate zero on the bevel scale,
loosen the screw that secures the
pointer and move the pointer as
necessary.
