3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
1.
ALWAYS
work in accordance with the instruction handbook;
2.
NEVER
exceed the maximum safe working load of 680 kg, and only use the
motorcycle lift for its intended purpose.
3.
NEVER
use the lift if it has been subjected to an abnormal load or shock. It
should be removed from service immediately and fully inspected by
qualified personnel, and passed as serviceable, before being used again.
4.
NEVER
rely upon the hydraulic ram to support the saddle when loaded.
Always use the locking bar to hold the saddle in one of the positions
provided.
5.
ALWAYS
use the lift on a solid, flat, level surface.
6.
ALWAYS
screw down the stabilisers before putting the saddle under load.
NOTE:
The castors are not designed to take the weight of the motorcycle,
but are used merely to move the lift quickly and easily around the
workshop. On no account must you raise a loaded platform
unless the stabilisers are screwed down, and NEVER use the lift to
transport a load.
7.
ALWAYS
use appropriate safety equipment, such as protective footwear,
when using this lift.
8.
ALWAYS
inspect the lift before use to ensure it is in good condition, and
replace any damaged or worn parts.
9.
ALWAYS
use spare parts supplied by Clarke International. Using non-
standard parts could be extremely dangerous.
10.
ENSURE
the operator is trained in both operational and safety aspects.
11.
NEVER
leave this lift unattended whilst there is a load on it.
12.
NEVER
allow children or bystanders anywhere near this lift whilst it is in use.
13.
NEVER
use this lift to lift people or animals.
UNPACKING
Check to ensure that no damage has occurred during transit. Any damage
should be reported to your Clarke dealer immediately.
The following should be included:
1 x Main frame assembly
1 x Lifting pedal
1 x T - Handle assembly and retaining pin
1 x Locking bar handle
1 x Hydraulic pump assy c/w lowering pedal
1 x Pair of rachet straps
