5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7. Use a 19mm hex socket to turn the hexagonal drive nut until the yokes are
firmly in contact with the spring.
8. Now continue to compress the spring.
9. Remove the spring and compressor assembly from the vehicle as soon as
you have attained sufficient compression.
10. With the spring supported turn the hexagonal drive nut in the opposite
direction and remove the compressor and yokes from the spring.
11. To re-mount the spring, reverse the procedure.
WARNING: AIR TOOLS MUST NOT BE USED TO ADJUST THE SPRING
COMPRESSOR. USE OF AIR TOOLS WILL INVALIDATE THE WARRANTY.
WARNING: DO NOT ALLOW THE SPRING WINDINGS TO TOUCH. DO NOT
ALLOW THE COMPRESSOR TO REACH THE LIMIT OF ITS TRAVEL IN EITHER
DIRECTION.
