Thank you for purchasing this CLARKE screwdriver. Before attempting to use the tool, please read these
instructions thoroughly and follow them carefully. In doing so you will ensure the safety of yourself and that
of others around you, and you can look forward to your purchase giving you long and satisfactory service.
SAFETY INSTRUCTIONS
Ensure all workshop safety rules, regulations, and conditions are complied with when using this tool.
Maintain the screwdriver in good condition at all times.
The screwdriver is a precision tool. Do not drop or abuse it.
Do not use the screwdriver if damaged or thought to be faulty.
After use adjust to the lowest setting, clean, and store in a dry, secure location.
INTRODUCTION
This tool is ideal for automotive based applications including
replacement of air bag, crash sensor and inertia reel fixtures.
Robust construction with easy to read window for precise torque
settings. Includes popular sized bits and 1/4” drive adaptor.
Textured, contoured handle for added grip and comfort.
Supplied in composite storage case. Suitable for both left and
right-hand threads.
OPERATION
Hold the screwdriver and pull out the adjusting ring at the base
of the screwdriver. Turn clockwise to increase the setting or anti-clockwise to reduce the setting until
the required torque is shown on the scale (contrasting line marks the setting). Release the adjusting
ring and ensure it is fully pushed back into place.
When tightening the screw, nut or bolt you will feel and hear the mechanism click when the set
torque is reached. Immediately stop to avoid overtightening.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with general household waste. All tools, acessories and
packaging should be sorted, taken to a re-cycling centre and disposed of appropriately.
11/08
TORQUE SCREWDRIVER
Model No.CHT604 - (PART NO: 1801604)
Содержание CHT604
Страница 2: ......
