9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
HAMMER DRILL SELECTION
Slide the drill/hammer drill mode
selector switch to the ‘Hammer’
symbol on the drill body.
NORMAL DRILL SELECTION
Slide the drill/hammer drill mode
selector switch to the ‘Drill’ symbol
on the drill body.
NOTE: Both these operations should
only be performed when the drill is at
a complete stop.
FORWARD / REVERSE SELECTION
1. Set the forward/reverse selector
switch to the position marked ‘R’
for normal ‘Right Hand’ (forward)
rotation for drilling holes.
2. Set the forward/reverse selector
switch to the position marked ‘L’
for ‘Left Hand’ (reverse) rotation
to reverse the drill out of the
workpiece.
NOTE: This operation should only be
performed when the drill is at a complete stop.
SPEED SELECTION
1. Turn the variable speed control in
the centre of the trigger until the
drill runs at your chosen speed.
2. The drill can be locked runnning
by pressing the lock-on button
after the trigger is squeezed.
3. To stop the drill, just squeeze the
trigger again.
