5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7.
Finishing drilling.
Do not touch the drill bit immediately after use, allow time
for it to cool.
8.
Use outdoor extension leads
. If working outdoors, always use an approved
cable extension suitable for the power rating of this tool (see
specifications), the conductor size should also be at least the same size as
that on the machine, or larger. When using a cable reel, always unwind the
cable completely. We strongly recommend that this machine is
connected to the mains supply via a Residual Current Device (RCD).
9.
Cooling agents
. When drilling metals, always use a cooling agent i.e.
cutting/soluble oil.
SERVICE
1.
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
SPECIFICATIONS
Item
Specification
Operating Modes
Drill or Drill & Hammer Action/Reverse
Chuck Capacity
1.5 mm -13 mm
Rated No-load Speed
0 - 2800 rpm
Weight
2.17 kg
Impact Rate
4200 blows/min
Rated Drilling Capacity (mm)
Wood, 32/ Steel, 12 / Masonary,16
Dimensions (L x W x H)
313 x 67 x 207 mm
Operating voltage & Frequency
230V~50Hz
Fuse rating
13 A
Motor Power
850W
Sound Pressure Level
91.34 dB LpA
Sound Power Level
102.34 dB L
WA
Vibration Level using 6 mm drill bit
Vibration Level using 8 mm drill bit
Front 6.228 m/s
2
, Aux. 5.017 m/s
2
Front 15.163 m/s
2
, Aux. 9.601 m/s
2
