9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
HAMMER DRILL SELECTION
Rotate the drill/hammer drill mode
selection switch so that the ‘Hammer’
symbol is aligned with the arrow on
the drill body.
NORMAL DRILL SELECTION
Rotate the drill/hammer drill mode
selection switch so that the ‘Drill’
symbol is aligned with the arrow on
the drill body.
NOTE: Both these operations should only be performed when the drill is at a
complete stop.
FORWARD / REVERSE SELECTION
1. Set the forward/reverse selector
switch to the position marked ‘R’
for normal ‘Right Hand’ rotation
for drilling holes.
2. Set the forward/reverse selector
switch to the position marked ‘L’
for ‘Left Hand’ rotation to reverse
the drill out of the workpiece.
NOTE: This operation should only be
performed when the drill is at a
complete stop.
SPEED SELECTION
1. Turn the selector knob until the
number is aligned with the arrow
on the drill body).
NOTE: This operation should only be
performed when the drill is at a
complete stop.
• The maximum speed may be
selected by turning the
variable speed control in the
centre of the trigger.
CHD850 Hammer Drill rev 4.fm Page 9 Monday, February 9, 2015 10:47 AM
