7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PREPARING THE STAPLER/NAILER FOR USE
FILLING THE MAGAZINE
1. Press and hold the magazine
catch (1) then pull out the
magazine (2).
2. Turn over the stapler/nailer and
insert the staple strip or the nail
strip.
• Hold the stapler/nailer at a
slight angle while inserting the
nail strip so that nails rest
against the side wall.
• Nails should be placed against
the side of the chamber which
has a dip in it (Left side when
the tool is inverted and the yoke is furthest away from the user).
• Only those fasteners stated in the specification should be used.
3. Close the magazine.
• Make sure it clicks shut.
WARNING: SWITCH OFF THE STAPLER/NAILER AND REMOVE THE PLUG
FROM THE MAINS POWER SUPPLY BEFORE FILLING THE MAGAZINE.
CAUTION: KEEP YOUR FINGERS WELL AWAY FROM THE TRIGGER,
