5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
IMPORTANT: Due to the weight of the components, we recommend that you
get assistance during assembly.
1. Loosely bolt the column to the
rear cross member.
2. Loosely bolt the side arms to the
rear cross member.
3. Bolt the straight castors to the
brackets on side arms.
4. Attach the castors to the side
arms, using the nuts, bolts &
washers.
5. Fit the mounting plate to the
upright column and secure with
the locating pin.
6. Attach the four mounting arms to
the mounting plate with nuts, bolts
and washers.
7. Pass the handle through the hole
in the spindle of the mounting
plate.
8. Ensure that all weight is spread
evenly across the crossmember
and side arms, making sure that
all four wheels are on level
ground and that the assembly is
sitting square and true. Tighten all
nuts and bolts.
9. Fit the parts tray to the column.
INSPECTION BEFORE USE
1. Always visually inspect the stand before use, to ensure that all parts are
correctly located and secure. Check for cracks, deformation or other signs
of damage or worn parts and check the castors for damage. Do not use
the stand unless it is totally sound.
2. Check castors to ensure they move freely without undue wear to their
pivots, and that the wheels are not cracked or damaged in any way.
3. Remove any rust or corrosion and repaint for protection.
Содержание CES560
Страница 1: ...USER INSTRUCTIONS GC0315 ENGINE STAND MODEL NO CES560 PART NO 7610123...
Страница 8: ......
