Clarke CES560 Скачать руководство пользователя страница 3

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SAFETY PRECAUTIONS

1. Do not allow personnel to use the stand unless they have read these safety 

precautions.

2. Never tamper with the product or modify it in any way, as this could prove 

to be dangerous and will invalidate the guarantee. Only use the product 
for the purpose for which it is intended.

3. Ensure that the stand is in good working order. Have any damaged parts 

repaired or replaced immediately. Use genuine Clarke parts only. The use 
of unauthorised parts may be dangerous and invalidate the guarantee.

4. Do not use the stand if it is damaged.

5. Use the stand in a suitable, well lit work area.

6. Keep the work area clean and tidy and free from unrelated items.

7. Do not use the stand when you are tired or under the influence of alcohol, 

drugs or intoxicating medication.

8. Use the stand on level and solid ground, preferably concrete. Avoid soft/

unmade ground as the castors may sink in.

9. Ensure all bystanders keep at a safe distance whilst the stand is in use.

10. Do not work underneath an engine mounted on the stand.

11. Never climb on, or attempt to ride on the stand.

12. Take care not to trap your fingers in the adjustable parts of the stand.

13. Due to the weight of the loaded stand, the help of an assistant will be 

beneficial when moving the stand around.

14. Never attempt to move a loaded engine stand across a floor having 

cracks, pebbles, or other obstacles which might impede its movement.

15. The components of this engine stand are designed to withstand the rated 

capacity. Do not substitute any other components or exceed the rated 
capacity of the stand.

16. To move a loaded stand, push it from the load side. DO NOT move the 

stand from the handle end and never pull the stand towards yourself.

17. Always ensure the engine is properly bolted to the stand.

18. Do not over-reach. Keep your proper footing and balance at all times.

19. Safety equipment such as gloves and non-skid shoes will reduce personal 

injuries.

20. Failure to heed these warnings may result in damage to the equipment, or 

serious personal injury.

Содержание CES560









Отзывы: