background image

Thank you for purchasing this CLARKE Electric Planer which is designed for DIY and light
workshop use only.

Before attempting to use the machine, please read this manual thoroughly and follow the
instructions carefully. In doing so you will ensure the safety of yourself and that of others
around you, and you can look forward to the planer giving you long and satisfactory service.

Guarantee

This product is guaranteed against faulty manufacture for a period of 12 months from the
date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in
any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to
us without prior permission.

This guarantee does not effect your statutory rights.

Specifications

Elec. Supply ............................................................ 230V 50Hz 1 ph

Power Rating .......................................................... 650 watt motor

Fuse Rating ............................................................. 5amp

No Load Speed ...................................................... 15,000

Net Weight .............................................................. 2.67kg

Base Length ............................................................ 290mm

Cutting  Depth ....................................................... 0-2mm

Cutting Width ......................................................... 82mm

Vibration Emissions ................................................. Refer to notes on page 11

Overall Dimensions ................................................ 285 x 154 x 157mm

Please note that the details and specifications contained herein, are correct at the time of going to print. However,

CLARKE International reserve the right to change specifications at any time without prior notice.

This Product Conforms To 98/37/EEC Regulations

Declared vibration emission value in accordance

with EN12096

Measured vibration emission value -

 a:

2.9m/s

2

Uncertainty value - 

K:

1.16m/s

2

Highest measured reading in a single plane

3.9m/s

2

Values determined according to EN28622-1

- 1 -

When disposing of this product, ensure it is disposed of according to all local ordinances. It must
not be disposed of with general household waste.

Содержание CEP1












Отзывы: