Clarke CDT300 Скачать руководство пользователя страница 5

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

MACHINE USE AND CARE

1.

Store out of the reach of children and do not allow persons unfamiliar with 
the machine or these instructions to operate it. 

Machines are dangerous in 

the hands of untrained users.

2.

Maintain equipment

. Check for misalignment or binding of moving parts, 

breakage of parts and any other condition that may affect the machine’s 
operation. If damaged, have the machine repaired before use. Many 
accidents are caused by poorly maintained machines.

3.

Use the machine in accordance with these instructions and in the manner 
intended, taking into account the working conditions and the work to be 
performed

. Use of the machine for operations different from intended use 

could result in a hazardous situation.

4.

Always observe the safety precautions for the handling of fuel.

5.

NEVER 

make any adjustment or perform a service operation with the 

engine running.

6.

Position the machine in such a way that it cannot move during re-fuelling 
or maintenance

.

7.

Always keep your hands away from any moving parts

.

8.

Always slow the engine down as far as possible when not actually working 
and shut off as soon as possible

.

9.

Avoid contact with hot surfaces including the engine and muffler.

 They will 

remain hot for a short time after switching off the engine. Allow the engine 
to cool before making any adjustments or carrying out any maintenance.

REFUELLING

1.

Always refuel in a well ventilated area. 

Do not smoke or allow sparks, open 

flames or other sources of ignition near the unit while adding fuel.

2.

Always stop the engine and allow it to cool down before re-fuelling.

 Never 

remove the cap of the fuel tank or add fuel while the engine is running or 
hot. Do not use the machine if any fuel leaks are detected.

3.

Always refuel away from any source of heat.

4.

Loosen the fuel tank cap slowly to relieve any pressure in the tank.

5.

Only fill to the level specified and avoid over-filling.

6.

Use only the correct fuel as stated in the specification.

 Replace the fuel 

cap securely and wipe up any spilled fuel. Never run the engine without 
the fuel cap in place.

7. Store spare fuel in containers designed and certified for this purpose.

Содержание CDT300





















Отзывы: