13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATING
CONTROLLING THE SPEED AND DIRECTION
1. After the engine warms up, move
the throttle lever to set the engine
speed.
2. Engage the required gear and
slowly press down the clutch
control lever to engage the drive.
3. If the gear does not engage
straight away, slowly release the
clutch lever and try again.
• The truck will now start moving.
• When the clutch control lever is released, drive will be disengaged
and the truck will stop automatically.
The gear selected is shown on the
label at the bottom of the truck.
• 3 x forward, neutral and reverse
4. The truck has the steering levers
on the handlebars. To turn right or
left, simply squeeze the
corresponding right or left steering
lever.
NOTE:
The sensitivity of the steering
increases in proportion to the
speed of the truck and
weight of the truck. With the
load box empty, a light
pressure on the lever is all
that is needed to turn. When the truck is loaded, more pressure is
required.
The truck has a maximum load capacity of 300kg. However, it is advisable to
assess the weight of the load and adjust it according to the ground on which
Содержание CDT300
Страница 20: ......
