![background image](http://html.mh-extra.com/html/clarke/cdm45c/cdm45c_operating-instructions-manual_2614624014.webp)
14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
GENERAL CARE
Never use the meter unless the rear cover is secure.
Clean the housing with a damp cloth dipped in a little detergent but never
chemical solution.
In case of any abnormality, stop using the meter and send it for repair.
REPLACING THE BATTERY
1. Turn off the meter.
2. Unscrew battery cover and remove.
3. Remove the battery and replace with a new one.
4. Clip the battery compartment to the casing and tighten the screw.
REPLACING FUSES
Fuses rarely need replacement. Almost all fuse blows are the result of operator
error. Fuses should be replaced by the Clarke Service Department with the
type(s) stated on page 4.
TEST LEAD REPLACEMENT
Replace the leads if they become damaged.
WARNING: BEFORE REMOVING THE REAR COVER, DISCONNECT THE
PROBES FROM THE CIRCUIT TO BE MEASURED. ENSURE THE COVER IS
TIGHTLY SECURED BEFORE USING THE INSTRUMENT.
WARNING: REPLACE THE TEST LEADS WITH IDENTICAL OR COMPATIBLE
LEADS. LEAD SPEC: 1000V 10A.
Содержание CDM45C
Страница 1: ...OPERATING INSTRUCTIONS GC0415 DIGITAL MULTIMETER MODEL NO CDM45C PART NO 4501155 ...
Страница 16: ......