Clarke CCM110, Инструкция по эксплуатации и техническому обслуживанию

Страница: 10 / 16

10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
• all 8 holes in the upper drum line up with those in the rubber seal and
in the lower drum.
• the lower tips of the blades line up with their fixing holes in the
bottom of the lower drum.
17. When all fixing holes line up,
secure the upper drum to the
lower drum using the 8 cross-head
screws and washers.
18. Bolt the mixing blades into the
bottom of the mixing drum using
M8 x 20 bolts and nuts.
19. Tighten all fixings and check that
all components are secure.
OPERATION
1. Switch the mixer on by pressing
the green (I) switch on the motor.
Stop by pressing the red (O)
switch.
2. Introduce water first, to prevent
the mixer from clogging.
3. Add cement as required.
4. Add aggregate etc.
• Do not load the drum when the
machine is switched off. Always set the machine running before
filling.
• Do not stop and start the mixer while there is a heavy weight of
material inside the drum as the extra strain could be harmful to the
motor.
• Keep the drum rotating while emptying the mixture.