GET TO KNOW YOUR CORDLESS DRILL
Chuck
No key is required for operation. To secure a bit, hold the rear portion of the chuck
(b) securely with one hand and turn the front portion (a) clockwise (from the
front) . To remove the bit, repeat the foregoing but turn the chuck anticlockwise.
Removing the Chuck
Open the jaws to their fullest extent to allow a cross head screwdriver to be inserted,
down through the jaws, to engage in the cross head slot of the securing screw..
The screw has a
LEFT HAND THREAD
and must therefore be turned
CLOCKWISE
.
With the screw fully loosened, grasp the chuck and unscrew it from the drill in the
normal manner, i.e., by screwing it
ANTICLOCKWISE.
Variable Speed
Variable speed is possible according to the amount of finger pressure on the trigger (f).
Speed Range
2 speed ranges are provided. The selector lever is shown at (d). Operate this lever
ONLY when the chuck is stationary. The lower speed produces a higher torque.
Torque Adjustment
(c)
(For correct tightening of screws/nuts)
This control is located immediately behind the chuck assembly and is numbered
in steps from 1 to 8, plus one extra step, marked with a sign for a drill bit.
These settings allow the exact amount of torque, or turning force required, to be
applied and will help maintain consistent performance, especially where there
are many identical fixings to be made. It is particularly useful for preventing
4
