20
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4. Loosen the collet nut using the
spanner provided and remove
the cutter and collet nut if
required.
5. Insert the required collet/collet
nut and tighten it slightly.
6. Insert the cutter into the collet.
• At least 3/4 of the cutter shank
must be in the collet before
tightening.
7. Press and hold the spindle lock button and tighten the collet nut securely.
• Before every use of the machine make sure that the cutting tool is firmly
clamped to the end of the spindle.
8. Place the insert rings back in to their original position.
• The insert rings must be used in order to keep the spacing between table
and cutter to a minimum. Only fit enough insert rings so as to allow the
cutter to come through the surface of the table without touching the
rings.
• Before switching on check the insert rings are seated correctly
9. Reconnect the machine to the power supply.
Содержание CBTSR
Страница 28: ......
