Clarke CAX3TAB Скачать руководство пользователя страница 4

Страница: 4 / 4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

LOWERING THE VEHICLE

Slowly lower the vehicle onto the centre of the saddl

REMOVING THE AXLE STANDS

1. Raise vehicle clear of the axle stands.

2. Remove stands.

3. Ensure that all tools, equipment and personnel are clear before carefully

lowering the vehicle to the ground.

SPECIFICATION

WARNING: DO NOT LOAD THE STANDS OFF CENTRE. FAILURE TO HEED THIS
WARNING MAY CAUSE DAMAGE, INJURY OR LOSS OF LIFE.

Maximum Height

396 mm

Minimum Height

271 mm

Maximum Load

3 tonne (3000 kg) per pair or 1.5 tonne
(1500 kg) per stand

Product Weight

4.55 kg per pair

Содержание CAX3TAB

Страница 1: ...USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0821 rev 1 ALUMINIUM AXLE STANDS PAIR MODEL NO CAX3TAB PART NO 7600035...

Страница 2: ...not use more than one pair of axle stands Replace the warning label if it becomes unreadable Use only on a hard flat surface for example concrete Make sure that you chock all the wheels that remain o...

Страница 3: ...the locking pin if fitted 2 Raise the upper column to the required height and replace the locking pin 3 Position the axle stand under a suitable supporting point See your vehicle manual for the locati...

Страница 4: ...clear of the axle stands 2 Remove stands 3 Ensure that all tools equipment and personnel are clear before carefully lowering the vehicle to the ground SPECIFICATION WARNING DO NOT LOAD THE STANDS OFF...