9
Parts & Service: 020 8988 7400/E-mail: [email protected] or [email protected]
OPERATION
1. Slide the safety lock forward.
2. Squeeze the trigger
•
Allow the saw to reach full speed
before use.
3. Releaase the trigger to stop the
saw. When the blade has
stopped remove it from the
workpiece.
4. Release the trigger to stop the
tool.
5. Always ensure the tool has stopped before putting it down.
DISCONNECTING THE AIR SUPPLY
1. Do not disconnect the air supply hose until the compressor has been shut
down and the compressed air pressure released.
2. Once the pressure has been released, disconnect the air supply hose from
the tool.
STORAGE
1. Store the tool safely in its box in a dry, secure environment.
2. When storing, ensure the blanking plug is replaced on the airline
connector once the airline has been disconnected.
3. If the tool is not to be used for longer than 24 hours, run a few drops of
CLARKE airline oil into the air inlet and run the tool for a few seconds to
ensure that the oil has been well distributed throughout the tool.
TRIGGER
SAFETY LOCK
Содержание CAT32B
Страница 16: ......
