Clarke CAT195 Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Micromist Airline Lubricator.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

Your lubricator has been designed to give long and trouble free service. If, 
however, having followed the instructions in this booklet carefully, you 
encounter problems, take the unit to your local CLARKE dealer.

SPECIFICATIONS

GENERAL SAFETY RULES

WORK ENVIRONMENT

1. Keep the work area clean and tidy.

2. Dress appropriately - do not wear loose clothing or jewellery. Tie long hair 

out of the way.

3. Keep children and visitors away - do not let children handle the tools.

4. Do not operate air tools where there are flammable liquids or gases.

CAT195

Dimensions (D x W x H)

45 x 50 x 190mm

Air Inlet /Outlet Size

1/4“BSP

Max Flow

50 CFM

Max Inlet Pressure

250 psi

Max working Temperature

175 deg F

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN 
PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.

Содержание CAT195









Отзывы: