Clarke CAT193 Скачать руководство пользователя страница 3

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

3. Keep children and visitors away - do not let children handle the air tools.

4. Do not operate air tools where there are flammable liquids or gases.

USE OF AIRLINE EQUIPMENT

1. Stay alert and use common sense - do not operate an air tool when you 

are tired or under the influence of alcohol, drugs or medication.

2. Do not overreach - Keep proper footing and balance at all times.

3. Never use oxygen, CO

2

, combustible gases or any type of bottled gas as a 

source of power for air tools.

4. Do not exceed the maximum pressure for the airline component stated in 

the specification.

5. Check airline hoses for leaks or worn condition before use and ensure that 

all connections are secure.

6. Keep the air supply hose away from heat, oil and sharp edges.

7. Avoid damaging the component for example by applying excessive force 

of any kind.

8. Always maintain the air tool with care. Keep it clean for the best and safest 

performance.

COMPRESSED AIRLINE REQUIREMENTS

Use only clean, dry, regulated compressed air as a power source.

Air compressors must comply with the appropriate European Community 
Safety Directives.

A build-up of moisture in the air compressor will accelerate wear and corrosion 
in the air tool. Ensure any moisture is drained from the compressor daily and 
the airline filter is kept clean.

If an unusually long air hose is required, (over 8 metres), the line pressure or the 
hose inside diameter may need to be increased.

The air hose must be rated at least 150% of the maximum operating pressure of 
the air tool.

Содержание CAT193









Отзывы: