6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
A build-up of moisture or oil in the air compressor will accelerate wear and
corrosion in the tool. Ensure any moisture is drained from the compressor daily
and the inlet filter is kept clean.
If an unusually long air hose is required, (over 8 metres), the line pressure or the
hose inside diameter may need to be increased.
The air hose must be rated at least 150% of the maximum operating pressure of
the tool. For best performance it is recommended that a 3/8” ID hose is used.
Never exceed the maximum operating pressure for the tool. It is
recommended that air pressure to this tool does not exceed 90 psi at the tool
when running. Higher pressures and dirty air will shorten the life of the tool due
to faster wear and is a possible safety hazard.
Содержание CAT117
Страница 16: ......
