manualshive.com logo in svg

Clarke APK900, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Clarke APK900 Скачать руководство пользователя страница 15

15

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

MAINTENANCE

1. Release the cover from the base

unit by pinching the side clips
together and lifting the cover off.

2. Inspect the condition of the air

filter.

3. The filter can be washed in soapy

water or it should be replaced if
badly fouled.

4. Replace the filter and the cover.

IMPORTANT: NEVER OPERATE WITHOUT THE AIR FILTER;- DIRT COULD BE
SUCKED IN AND INTERFERE WITH THE FUNCTION OF THE SPRAY GUN.

Check the power cable to ensure it is sound and free from cracks, bare wires
etc.

The nozzle parts may wear with long term use, depending on the
abrasiveness of the materials being sprayed. More abrasive materials, such as
emulsions, will cause faster wear.

A worn nozzle may eventually develop a larger hole and scratches on the
surface, which will cause a poor spray pattern. Replacements are available
from your dealer or the Clarke International Parts Department.

STORAGE

For long term storage, always store in a well ventilated area and keep the
product dry and dust free.

ENVIRONMENTAL PROTECTION

If disposing of this product or any damaged components, do not
dispose of with general waste. This product contain valuable raw
materials and must be disposed of according to the laws governing
Waste Electrical and Electronic equipment and should be taken to your
local civic amenity site for recycling.

Fig 8

Содержание APK900





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды