- 5 -
GENERAL ARRANGEMENT
HVLP AP15 spray guns are available with one nozzle size (2.2mm), ensure your spray gun
is matched to the capacity of your compressor.
Model
Nozzle size
Compressor Required
AP15
2.2 mm
3 hp and above
For best results, the air supply to the spray gun must be clean and dry, with no oil or water
contamination. Follow the air compressor manufacturer’s guidelines on installation and
operation to ensure that your air supply is as clean as possible. The compressed air supply
line to the spray gun must be fitted with an oil and water extractor and a suitable pressure
regulator.
Connect the air supply to the spray gun using a suitable 1/4” BSP fitting.
AIR SUPPLY
A.
Paint Cup
G. Knurled Locking Ring
B.
Air Inlet
H.
Wings
C. Spray Width Adjuster
I.
Nozzle
D.
Trigger.
J.
Paint Cup Vent
E.
Fluid Control Adjuster
K.
Cup Locking Lever
F.
Air Adjuster
