Clarke Air AP15 Скачать руководство пользователя страница 2

- 2 -

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.

This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.

Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Please read these instructions carefully before operating the tool

Thank you for purchasing this 

CLARKE 

HVLP spray gun.

Before using the device, please read this manual thoroughly and carefully follow
all instructions given. This is for your own safety and that of others around you, and
is also to help you achieve long and trouble free service from your new spray gun.

PARTS & SERVICE TEL:  020 8988 7400

or    e-mail as follows:

PARTS:   [email protected]

SERVICE:    [email protected]

Please be aware that certain parts of this spray gun will wear, requiring replacement and
that these parts may not be covered by your guarantee.

The wear on certain parts depends on the abrasiveness of the materials being sprayed.
More abrasive materials such as latex paint (emulsions) will cause these parts to wear much
faster.

Replacement parts are available from your nearest Clarke International dealer.

Содержание Air AP15












Отзывы: