Accessories
A wide range of airline accessories is available from your nearest CLARKE dealer, for further information, contact your nearest dealer, or telephone CLARKE International Sales department on
01992 565300.
PARTS & SERVICE TEL: 020 8988 7400
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
Maintenance
IMPORTANT
Disconnect the gun from the air supply,
and relieve any pressure in the gun
and hose, before any disassembly.
The only maintenance other than to replace
worn or broken parts, is to keep the gun
clean and lubricated.
Occasionally clean the gun and lubricate
all moving parts, especially the trigger stud.
Inspect the gun and air hose for wear or
damage periodically, and replace if
necessary.
DO NOT use damaged or leaking hoses.
Specifications
Model: ...................................... 25CN
Part No: .................................... 3090150
Air Inlet Connector: ................ ¼”BSP
Minimum Compressor Size: .... 0.65HP
ALWAYS
wear a suitable approved breathing mask, to protect against inhalation
of dust or fumes.
ALWAYS
wear approved impact resistant safety goggles. Eye glasses are NOT
safety glasses.
ALWAYS
disconnect the gun from the air supply when it is not in use, and before
any disassembly.
NEVER
point gun towards people or animals. In the case of injury, seek expert
medical advice immediately.
NEVER
allow children to use or play with this appliance.
SAFETY PRECAUTIONS
For your personal safety and that of others around you. Follow these
safety instructions carefully.
Blow guns should only be connected to an
airline precedded by a pre-set tamper-
proof pressure regulator set at a reduced
pressure from the normal 80 psi airline
supply.
If in any doubt, please contact your
nearest Clarke service department.
The air supply should be completely cllean
and dry.
Lubricators of any kind should not be used
with blow guns.
WARNING
WARNING
Compressed air can be
dangerous. Ensure that you are
thoroughly familiar with all
precautions relating to the use of
compressors and compressed air
supply.
