Clarke 7640130, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 20

8
OPERATION
SAFETY AND HEALTH CONSIDERATIONS
• Before opening tank make sure that it is not pressurized. Ensure the
gauge reads “0”. If it does not, release pressure from the tank (See
page 11).
• Disconnect the compressor before opening the tank. Protect
yourself and those around you from “over-spray”. Remember that
your portable abrasive blaster is shooting a powerful spray of
abrasive material. Do not point it at yourself or anyone around you.
• Wear protective clothing including hood (30), and heavy gloves
when using this abrasive blaster.
• Wear a filter or mask over your mouth when using this tool. You will
create a cloud of abrasive material and debris which is dangerous
to inhale.
• Protect anything around you that may be damaged from the
abrasive spray or particles. Nothing subject to contamination
damage or with a fine surface should be near your abrasive
blaster.
ABRASIVE SELECTION
The kind of abrasive you choose will greatly influence the amount of time
needed to clean a given surface area.
WARNING: ALWAYS WEAR YOUR HOOD, DUST MASK AND HEAVY DUTY
CANVAS GLOVES WHEN OPERATING THE SANDBLASTER.
WARNING: BEFORE OPERATING YOUR SANDBLASTER, INSPECT EACH
CONNECTION, DOUBLE CHECKING TO MAKE SURE THAT ALL ARE TIGHT
AND PROPERLY SEALED.
WARNING: THIS SANDBLASTER IS NOT INTENDED FOR USE WITH SILICA BASED
ABRASIVES. WHICH HAVE BEEN LINKED TO SEVERE RESPIRATORY DISEASE.
ALWAYS USE SILICA SUBSTITUTES (SUCH AS CLARKE GLASS BEAD ABRASIVE.