3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
1. Read Instruction manual before use
2. NEVER exceed the rated load for the jack See “Specifications” on page 7.
Overloading can cause the Jack to fall resulting In personal Injury
3. Always inspect the jack before use. Make sure that all parts are in good
condition and operating smoothly, and that no cracks or distortion is
apparent. If in doubt do not use. Have the damaged parts replaced or
consult your CLARKE dealer.
4. Make sure that the jack is on a hard level surface, and there is no possibility
of it slipping when under load.
5. Make sure the load is taken by the full saddle and that the lifting point on
the load, is of sufficient strength to support the weight.
6. Always use axle stands to stabilise the load once lifted.
7. NEVER work on or under a load unless it is fully and adequately supported.
NEVER rely upon the jack to hold the load in position.
8. Never push a load off the jack.
9. Ensure that all personnel are well clear of a load being raised or lowered.
10. Do not use if an oil leak is apparent. Consult your Clarke dealer.
11. Consult the vehicle handbook to determine the correct lifting points.
12. Take care not to trap fingers within the moving parts.
13. Ensure the load is chocked and the handbrake applied before lifting.
14. Use only as a lifting device, do not use as a dolly to move a load.
Содержание 7623200
Страница 12: ......
