3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
• Due to the weight of the pipe bender the help of an assistant may be
beneficial during unpacking or when moving it around.
• ALWAYS operate on a suitably strong bench with adequate light.
• ALWAYS check for signs of cracked welds or any other structural damage
before starting work. Do not operate if any of these conditions exist. Have
repairs made only by a CLARKE service centre.
• NEVER tamper with the hydraulic components. The safety valve is calibrated
and sealed at the factory; - do not attempt to change the setting.
• Use only the recommended CLARKE hydraulic oil.
• The components of this pipe bender are designed to withstand the rated
capacity. Do not substitute any other components or exceed the rated
capacity.
• ALWAYS ensure the workpiece is secure before applying pressure.
• ALWAYS clean up any spillage of hydraulic oil immediately as this can be
dangerous in a workshop environment.
• Do not allow anyone who is unfamiliar with hydraulic tools to use the pipe
bender unless they are under direct supervision.
• ALWAYS ensure the work piece is properly positioned.
• ALWAYS keep hands and fingers away from parts that may pinch or shift.
• NEVER use extension tubes to increase the length of the pump handle.
Excessive effort can cause damage and/or accidents.
• Failure to heed these warnings may result in damage to the equipment, or
serious personal injury.
Содержание 7610901
Страница 12: ......