7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
This pump should require no maintenance other than regular cleaning.
If the pump shows signs of wear or damage, contact your CLARKE dealer.
CLEANING
1. Check the pump installation regularly to ensure the water inlet is clear of
leaves or other debris.
2. Take extra care to remove any debris from around the impeller.
NOTE:
Do not attempt to repair the pump yourself, as you may damage the
waterproof seal and invalidate your guarantee. Repairs must be
carried out by your CLARKE dealer, or contact the CLARKE Service
Department, on 020 8988 7400.
STORAGE
When the pump is not being used for extended periods, clean and dry it
thoroughly and store in indoors. if the pump is left in water, it must be run at
least once a week to prevent it from seizing up.
SPECIFICATIONS
WARNING: BEFORE CHECKING THE CONDITION OF THE PUMP, ENSURE IT
IS UNPLUGGED FROM THE MAINS SUPPLY. IF THE UNIT IS HARD WIRED,
ENSURE THE CIRCUIT BREAKER IS OPEN.
Voltage
230V~50Hz
Outlet Thread Diameter
1½“ BSP
Power 750W
Maximum Head Height
8 m
Maximum Depth
7 m
Maximum Flow
217 l/min
Maximum Water Temperature
35
o
C
Maximum Particle Size
30 mm
Weight
5.1 kg
Cable Length
10 m
Dimensions (D x W x H)
156 x 163 x 330 mm
Содержание 7230696
Страница 12: ......