2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE submersible pump.
The CLARKE range of submersible pumps are suitable for discharging pools,
ponds, fountains, pits and any waste water drainage. They can handle foul
water containing suspended material as stated in the specification. The
pumps are not suitable for handling inflammable, corrosive, explosive or
dangerous liquids. The pump is water-cooled and does not contain any oil.
The ‘Pump Performance Curve’ graph shown, displays the characteristics
graphically and describes the relation between the flow-rate and the head
for the pump.
The pump is provided with a thermal overload cut-out, so that in the event
that the pump becomes overheated (due to becoming blocked etc) it will
shut off automatically. When the blockage has been cleared, the thermal
cutout will cool down and re-set and the pump can be re-started.
Before attempting to use this product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will ensure
the safety of yourself and that of others around you, and you can also look
forward to the product giving you long and satisfactory service.
SPECIFICATIONS
Voltage
230V~50Hz
Ingress Protection
IP68
Outlet Diameter
2”(50mm)
Rated Output Power
1530 W
Maximum Head Height
10 m
Maximum Depth
8 m
Maximum Output
500 l/min
Maximum Operating Temperature
40
o
C
Maximum Solid body Size in Suspension
35 mm
Weight
19 kg
Cable Length
10 m
Dimensions (D x W x H)
270 x 170 x 460 mm
Содержание 7230293
Страница 16: ......