Clarke 7230291 Скачать руководство пользователя страница 5

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

4. ALWAYS use an approved cable extension suitable for the power rating of 

the pump (see specifications). The conductor size should also be at least 
the same size as that on the pump, or larger. When using a cable reel, 
always unwind the cable completely.

5. ALWAYS maintain the pump with care and keep it clean.

6. NEVER use for pumping flammable liquids or corrosive chemicals. These 

pumps are designed to pump water only.

7. NEVER abuse the electrical cable. Never use the cable for pulling or 

unplugging the pump. Damaged or tangled cables increase the risk of 
electric shock.

8. NEVER run the pump dry. Ensure the pump is immersed in water before 

starting. Switch the pump off immediately when the task is completed

9. NEVER pump water from a swimming pool when there is a person or animal 

still in the pool.

10. NEVER install the pump on sand, silt or mud which is likely to shift or 

collapse.

11. NEVER modify the pump in any way. Use it only for the purpose for which it 

is designed.

12. NEVER allow the pump to run dry or operate out of the water.

13. Submersible pumps should always be submerged and stored vertically.

14. Disconnect the pump from the mains supply before placing it into or 

removing it from the water.

15. NEVER insert your fingers into the pump whilst it is connected to the mains.

16. Keep the pump clear of any sediment by standing it on a platform or brick 

or suspending it at a suitable depth.

17. DO NOT use the pump if the water is liable to freeze, as this can cause 

damage to the pump. Remove the pump from the water and store it in a 
frost free location.

SERVICING & REPAIRS

1. ALWAYS have the pump serviced by your local CLARKE dealer, using only 

identical replacement parts. This will ensure the safety of the pump is 
maintained. The use of non standard parts could be hazardous.

2. NEVER attempt any repairs yourself unless suitable qualified. If you have a 

problem with the pump contact your local CLARKE dealer.

3. ALWAYS disconnect the pump from the electrical supply before placing it 

into, or removing from the water, and before any cleaning or 
maintenance.

Содержание 7230291

















Отзывы: