Clarke 7230291 Скачать руководство пользователя страница 4

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SAFETY PRECAUTIONS

WORK AREA

1. Keep the work area clean and well lit. Floors should always be kept clear. 

Cluttered or dark areas invite accidents.

2. Keep children and bystanders away while operating the pump. 

Distractions can cause loss of control.

3. Remember, the operator or user is responsible for accidents or hazards 

occurring to other people or their property.

PERSONAL SAFETY

1. ALWAYS stay alert, watch what you are doing and use common sense 

when operating this pump. Do not install the pump while you are tired or 
under the influence of medication, drugs or alcohol. A moment of 
inattention can result in personal injury.

2. DO NOT over-reach. Keep your proper footing and balance at all times 

when positioning the pump.

3. NEVER direct the water discharge towards electrical wiring or equipment.

4. ALWAYS store the pump out of reach of children and do not allow persons 

unfamiliar with these instructions to operate it.

5. NEVER direct the discharge flow towards another person.

6. ALWAYS thoroughly familiarise yourself with this pump & its operation and 

follow all instructions in this manual.

7. ALWAYS ensure that the pump is properly positioned where necessary to 

prevent it from moving during operation, and that the immediate area 
surrounding the pump is kept clear.

GENERAL USE AND CARE OF THE PUMP

1. An approved Residual Current Device (RCD) must be used when pumping 

from ponds or swimming pools.

2. ALWAYS lift the pump using the handle and use a rope or chain attached if 

necessary to lower it into the water. NEVER lift or carry the pump by the 
power cable.

3. NEVER use this pump if any part is damaged. ALWAYS check the plug, 

mains cable for damage before use. Have any damage inspected and 
repaired by your local CLARKE dealer.

Содержание 7230291

















Отзывы: