8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4. If the pump is being used to drain the pool, ensure there is adequate
drainage and there is no risk of damage to property as a result of water
being discharged. If a flexible hose must be laid across a roadway, protect
it with wooden planking.
MAINTENANCE
The only maintenance required is a regular inspection to ensure that debris is
not blocking the passage of water through the pump.
Clean the filter basket periodically
after closing any inlet and delivery
valves and removing the filter cover,
using the wrench provided. Lift out
the filter basket and clean it in water,
check the cover O-ring is in good
condition before reassembly.
If you suspect the pump is blocked by
silt, leaf debris etc, disconnect it from
the mains supply and backflush to
clear any blockage though the drain
plug. You will need to disconnect the outlet hose to do this.
Always keep the pump in a clean condition, checking regularly for loose bolts
or a damaged power cable etc.
AFTER USE
After use, and if the pump will not be used over the winter period, or whenever
there is danger of freezing, always drain the pump body. If the pump has
been used with contaminated or salty water, it should be thoroughly flushed
with clean water following use, both inside and out. It should then be drained
before replacing the drain plug, and covered over, if not already installed in a
clean, dry environment sheltered from the weather. Remember to re-prime
the pump when returning to service.
In the event that dismantling and overhaul of the pump is necessary, contact
your CLARKE International Service Department on 020-8988-7400
Содержание 7175036
Страница 16: ......
