Clarke 7120310 Скачать руководство пользователя страница 12

12

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

High friction losses in the 
suction line.

Avoid unnecessary 
curves, restrictions or 
valves

Pump badly sited result-
ing in suction lift too high

Set pump as close as 
possible to the level of 
the water to be pumped

Sudden loss of flow.

Blockage of inlet pipe

Check pipeline for 
blockage.

Undue vibration or noise. Excessive flow of water.

Decrease flow of water. 
by adjusting inlet/outlet 
valves in system.

Resistance in inlet pipe 
caused by obstruction.

Check pipe and clean 
out as necessary

Loose rotating 
component

Return to your dealer for 
repairs.

Installation of pump is 
unstable.

Stop pump and              
re-position.

Air pocket in pump or 
pipeline.

Release plug in impeller 
housing to release air.

Damaged impeller

Return to your Clarke 
dealer for repair.

Содержание 7120310

















Отзывы: