4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4.
Remove any wrench before turning the power tool on
. A wrench left
attached to a rotating part may result in personal injury.
5.
DO NOT overreach.
Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
6.
Dress properly.
Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
POWER TOOL USE AND CARE
1.
DO N
OT force the power tool. Use the correct accessories for your
application. The correct power tool will do the job better and safer at the
rate which it was designed.
2.
DO NOT use the power tool if the switch does not turn it on and off.
Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
3.
Disconnect the plug from the power source before changing accessories, or
storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4.
Store idle tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate it.
Power tools
are dangerous in the hands of untrained users.
5.
Maintain power tools
. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
6.
Use the power tool and accessories in accordance with these instructions
and in the manner intended, taking into account the working conditions and
the work to be performed
. Use of the power tool for operations different from
intended could result in a hazardous situation.
7. The performance of this tool may vary, depending upon variations in line
voltage. Extension cable usage may also affect performance.
SERVICING
1.
Have your power tool serviced by qualified service personnel using only
identical replacement parts.
This will ensure that the safety of the power tool
is maintained
.
BUFFER/POLISHER SPECIFIC WARNINGS
1.
DO NOT
get the buffer/polisher wet or use in damp or wet locations.
Содержание 6500485
Страница 12: ......
