14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE SANDER
ON-OFF SWITCH
Press green button " - " to turn switch
ON
Press red button " O " to turn switch
OFF.
WHEN THE SANDER IS RUNNING
Before starting your work, watch the
sander while it runs.
If it makes an unfamiliar noise or
vibrates excessively, stop immediately. Switch off and unplug the sander. Do
not restart until identifying and correcting the problem.
Don’t force the sander. It will perform better and safer at its designed rate.
Press workpiece against the sanding sleeve or belt hard enough to begin
sanding without binding.
BEFORE FREEING ANY JAMMED MATERIAL
• Switch OFF ( O ).
• Unplug the sander.
• Wait for all moving parts to stop.
BEFORE LEAVING THE SANDER
• Switch off. Do not leave the sander until the unit comes to a
complete stop.
CAUTION: BEFORE TURNING THE SWITCH ON, MAKE SURE THE BELT OR
DRUM AND SLEEVE ARE PROPERLY INSTALLED.
WARNING: ALWAYS WEAR SAFETY GOGGLES OR SAFETY GLASSES WITH
SIDE SHIELDS WHEN OPERATING POWER TOOLS. FAILURE TO DO SO
COULD RESULT IN OBJECTS BEING THROWN INTO YOUR EYES, RESULTING
IN POSSIBLE SERIOUS INJURY.
