Clarke 6470619, Инструкция пользователя

Страница: 8 / 12

SETUP AND OPERATION CONTINUED
BUCKET EMPTYING
1. When the bucket is full the ‘FULL’ light will illuminate.
2. Wait a few minutes to allow the machine to stop operating before
removing the bucket.
3. To remove the bucket, grip each side and lever out, carefully lift and pour
the water away, then replace back into the correct position.
CONTINUOUS WATER DRAIN
For continuous water drainage use a hose with an inner diameter of 14 mm (not
supplied)
1. Turn the drain cover anticlockwise to
remove.
2. Remove the tube stopper from the
drainage tube.
3. Attach the hose to the drainage tube.
4. The hose should be lead to the drain
with no sharp bends.
5. Make sure the bucket is in place.
Drain
cover