Clarke 6470611 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 20

Clarke 6470611 Скачать руководство пользователя страница 13

13

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

MAINTENANCE

CLEANING THE CABINET

• Use a soft damp cloth to clean the exterior.

• Never use harsh chemicals or abrasive cleaning agents as these may

damage the casing finish.

• Clean the water tank and its cover regularly to prevent mould build up.

CLEANING THE AIR FILTER

1. At the front of the machine, pull the filter

upwards and out, using the tab.

2. Wash the filter under running water to

remove any dust and dirt.

3. Allow the filter to dry naturally.

4. Refitting is the reverse process.

NOTE:

The frequency depends on the

duration and the level of dust in
the environment. If the machine is
being used regularly, it is
recommended that you clean the
filter every 2 weeks.

STORAGE

• Unplug from the mains socket.

• Empty any water from the tank.

• Clean and reinstall the filter.

• Cover the dehumidifier to prevent dust getting into the workings.

WARNING: ALWAYS UNPLUG THE DEHUMIDIFIER BEFORE PERFORMING
ANY CLEANING OR MAINTENANCE OPERATIONS.

«
...
11
12
13
14
15
...
»

Содержание 6470611





















Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды