8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
FITTING THE ACCESSORIES
1. If attached, use the hex key
supplied to remove the retaining
screw and retaining disc.
2. Fit your chosen accessory onto
the drive spindle.
• Make sure that the locating
pins engage with the
corresponding holes in the
accessory and that the
accessory lays flat on the
spindle.
3. Replace the retaining disc.
• Make sure that the ridged face
of the retaining disc is in
contact with the accessory.
4. Use the hex key supplied to secure
with the retaining screw.
• Do not overtighten.
WARNING: REMOVE THE PLUG FROM THE POWER SUPPLY BEFORE FITTING
OR REMOVING THE ACCESSORIES.
Содержание 6462199
Страница 16: ......
