15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. Loosen the table lock knob and
tilt the table until it is
approximately at right angles to
the blade.
4. Place a small square on the saw
table next to blade and lock the
table at 90° to square.
5. Retighten the table lock knob.
SETTING THE SCALE INDICATOR
1. Loosen the securing screw holding the scale indicator. Move the indicator
to the 0° mark and securely tighten the screw.
• Remember, the scale is a guide only and should not be relied upon
for precision.
• Make practice cuts on scrap material to ensure your angle setting is
correct.
2. Lower the pressure plate so it just rests on top of the work piece and lock in
place.
