5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6.
Keep cutting tools sharp and clean.
Sharp cutting edges are less likely to
bind and are easier to control.
7.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
SERVICING
1.
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
PLANER SAFETY WARNINGS
1.
Always start the planer before the blade is in contact with the workpiece
and let the blade reach full speed.
The tool can vibrate or chatter if blade
speed is too slow at beginning of the cut and possibly kickback.
2.
Check the workpiece for nails or screws. If there are nails/screws, either
remove or set them well below intended finished surface
. Kickback,
damage to the blades and personal injury can result If the planer blades
strike objects like nails.
3.
After changing blades, rotate the blade drum to make sure the blades are
not hitting any part of the housing and that the blade locking screws are
tight.
Spinning blades could strike the tool housing and damage the
machine as well as causing possible injury.
4.
Do not put your fingers or any objects into the shavings exhaust port or
clean out shavings while the tool is running.
Contact with blade will cause
injury.
5.
Disconnect from the power source if it becomes necessary to remove
woodchips.
The blades are hidden from view and you may be cut if the
blade is touched.
6.
Do not use dull or damaged blades. Sharp blades must be handled with
care.
Damaged blades can snap during use.
7. Regularly check to ensure the ‘Anti-Kickback pawls operate correctly.
8. NEVER plane a piece of wood without the Cutter Guard completely
covering any exposed Cutter Blade
9. ALWAYS ensure the blades are properly secured in the cutter block before
use.
Содержание 6462130
Страница 20: ......
