18
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
NOTE:
The planed surface will end up rough and uneven if blades are
not set correctly or securely.
10. Tighten the clamping screws using
the blade wrench, ensuring that
all three screws are tightened
evenly.
11. Repeat steps 2 - 10 for the
installing/changing the second
blade. It is important to reverse or
replace the two blades at the
same time so they are balanced
with one another. Both blades
must be set to the same cutting
level and alignment, otherwise the planed surface will be rough and
uneven.
MAINTENANCE AND SERVICING
CLEANING
• Keep the planer clean of any wood chips, dust, dirt or debris.
• Ventilation openings must be kept clean and free of foreign matter.
• The planer can be cleaned most effectively with compressed dry air.
• Always wear safety goggles when cleaning power tools with
compressed air.
CAUTION: TIGHTEN ALL CLAMPING SCREWS CAREFULLY WHEN
ATTACHING THE BLADES TO THE PLANER. A LOOSE CLAMPING SCREWS
CAN BE EXTREMELY DANGEROUS. CHECK REGULARLY TO MAKE SURE
THAT ALL SIX CLAMPING SCREWS ARE TIGHTENED SECURELY.
WARNING: MAKE SURE THAT THE PLANER IS TURNED OFF AND
UNPLUGGED FROM THE POWER SOURCE BEFORE CLEANING AND
MAINTENANCE OPERATIONS.
WARNING: REFER TO YOUR CLARKE DEALER IF INTERNAL MAINTENANCE IS
NECESSARY.
WARNING: CERTAIN CLEANING AGENTS AND SOLVENTS DAMAGE
PLASTIC PARTS. SOME OF THESE ARE: GASOLINE, CARBON
TETRACHLORIDE, CHLORINATED CLEANING SOLVENTS, AMMONIA AND
HOUSEHOLD DETERGENTS THAT CONTAIN AMMONIA.
Содержание 6462019
Страница 24: ......
