15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE RABBETING DEPTH GUIDE
The rabbeting depth guide can be adjusted anywhere from 0 to 18mm above
the base of the planer. To attach the rabbeting depth guide:
1. Disconnect the planer from the power source.
2. Attach the rabbeting depth
gauge to the right-hand side of
the planer using the lock knob.
3. Position the rabbeting depth
gauge to the desired height
against the depth indication mark
on the side housing. Tighten the
lock knob.
4. If desired, use the parallel guide
fence in conjunction with the
rabbeting depth guide to create
a straight rabbeting cut.
5. Make multiple progressive cuts to
achieve the total cutting depth.
• The required rabbeting depth is
achieved when the depth
gauge is flush with the
unplaned section of the
workpiece to the right-hand side of the tool.
NOTE:
The rabbeting depth gauge allows only approximate depth
settings. If it is necessary to rabbet to a precise depth, plane a
scrap piece of wood, measure the rabbeted depth, and adjust
the setting as necessary.
Содержание 6462019
Страница 24: ......
