8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FITTING DISCS & GRINDING STONES TO THE MANDREL
1. Mount the selected disc on to the
mandrel as shown, ensuring the
two washers are in place.
•
DO NOT overtighten the screw.
FITTING CLOTH POLISHING WHEELS
1. Screw the cloth wheel onto the
mandrel firmly but do not
overtighten.
ASSEMBLING SANDING BANDS
1. Slacken the screw on the end of
the mandrel and slide the
appropriate abrasive band fully
onto the rubber former.
2. Tighten the screw to secure the
band to the former.
FITTING THE COLLET
The rotary tool is supplied with 2 interchangeable collets; 2.3mm and 3.2mm
(one supplied already fitted to the rotary tool).
Select the collet to be fitted according to the shaft size of the mandrel or other
accessory to be used.
WARNING: MAKE SURE THAT THE TOOL HAS BEEN DISCONNECTED FROM
THE POWER SUPPLY BEFORE REMOVING OR FITTING A COLLET OR
ACCESSORY
Содержание 6462000
Страница 16: ......
