background image

IMPORTANT NOTE:

This manual is intended to instruct the user on the operations peculiar to
the CR2 Router ONLY. Although some reference is made to routing
applications, it should not be regarded as a general tutorial on the subject.

It is assumed that the user has some knowledge of tools of this type,
and is familiar with routing techniques and applications. If this is not
the case, we strongly recommend that the user seek professional advice
and tuition before using this tool.

SPECIFICATIONS

Elec. Supply ..................................................................................... 230V 50Hz 1 ph

Elec. Class ........................................................................................ II

Motor Power Rating ....................................................................... 2100W

Fuse Rating ...................................................................................... 13amp

No Load Speed .............................................................................. 7,400-21,600 RPM *

Max. Plunge Depth ........................................................................ 60 mm

Collet Size - Fitted ........................................................................... 1/2”

Dust Extraction Adapter Port Size ................................................. 22mm

Net Weight ...................................................................................... 6.5 kg

Guaranteed Sound Power Level: ................................................ 107.3 dBL

WA

Vibration Level ................................................................................ 4.7m/s

**

Dimensions ...................................................................................... 319x323x140

* Speed  Settings are shown on page 12.

** See Vibration Emission notes on pages 16 and 27

2

When disposing of this product, do not dispose of with normal household waste. Dispose of according to all local ordinances

CHECK LIST

1 x Carry case.

1 x User Instruction Manual.

1 x Router.

1 x Parallel Fence.

2 x Guide Rods.

1 x Spanner.

1 x 16mm Template Guide Bush.

1 x 30 mm Template Guide Bush.

15 x Cutting Bits (Various).

1 x 1/4” collet

1 x 3/8” collet

(1 x 1/2” collet - fitted)

©  

 Copyright Clarke International. All rights reserved, March 2006

Please note that the details and specifications contained herein, are correct at the time of going to print. However,

CLARKE International reserve the right to change specifications at any time without prior notice.

Содержание 6460200

















Отзывы: