4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
A complete torch assembly with
electrode, is supplied, and is
assembled as follows:
1. Screw the collet body into the
head of the torch, (Fig.1) and
tighten finger tight.
2. Screw on the ceramic nozzle
insulator (Fig 2).
NOTE:
Before assembly, file or grind
the tip of the electrode to a
point (from 40
o
to 60
o
), as
this will give optimum
performance.
3. Pass the electrode through the
collet from the shoulder end and
insert the collet into the collet
body through the rear of the
torch, with its shoulder facing the
rear as in Fig 3.
4. Pass the electrode through, so
that it protrudes from the nozzle
by approx.10mm and screw on
the rear end cap.
If welding space is likely to be
restricted, the short end cap should
be used in conjunction with an
electrode of reduced length.
Otherwise use the long end cap and
standard electrode.
5. As the end cap tightens, the
electrode will be gripped and
secured in position. Whilst it is still
possible for the electrode to
Содержание 6012232
Страница 8: ......
